More actions
 |
Difficulty: Medium Supervisors: Chief Engineer Rank: Sergeant Duties: Make custom ordnance for the marines to use. Maintain the orbital cannon and the dropships. Guides: Construction, Guide to Engineering Unlock Requirements: Not available. Detailed Description: Your job is to maintain the integrity of the USCM weapons, munitions and equipment, including the orbital cannon. You can use the ordnance workshop in the portside hangar to construct new custom armaments for the marines. However you remain one of the more flexible roles on the ship and as such may receive other menial tasks from your superiors such as ship maintenance. As the ordnance tech you answer to the chief engineer. Special circumstances may change this. |__________| |
"The intakes are clogged. We overheated and burned out a whole cell... Christ, it's really breaking loose down here..."
― Corporate Engineer Brett, Alien
The Ordnance Technician (OT) is an enlisted USCM crewmember of the USS Almayer's engineering department. Trained in all types of engineering work and directly supervised by the commissioned Chief Engineer. They are primarily responsible for maintaining the integrity of the USCM ordnance such as tinkering with armaments and using powerloaders to reload the dropships and orbital cannon. But as a flexible shipside technician with superior engineering skills, situations may arise where they are given orders by a superior to assist with various other duties such as ship maintenance, special construction projects or FOB duty.
Overview
You begin the mission in either the ordnance workshop in the hangar or the engineering department at the back of the ship. Reach out over the engineering radio (:e) to report to your department, composed of fellow Ordnance Technicians and the Chief Engineer, whose orders you must carry out. The workshop has everything you need in the storage room, and you may find some additional supplies in the engineering department. There are also many rooms maintenance rooms and engineering outposts strewn around the Almayer with supplies you can use for emergency repair should an accident happen.
The Ordnance Workshop
The Almayer's Ordnance Workshop is located in the portside hangar. It consists of the storage room, the workshop, and the reception.
In the storage room you will find all the materials you will need throughout most of the mission. If you run out, you can request bulk supplies from Requisitions. If medbay isn't busy you can try to ask very nicely and they might dispense chemicals for you, but they are not obligated to do so. It is also possible that the ground troops brings up more materials for you. In the workshop, you have the machinery and space required to do your work. The vendors and closets contain various spare items. Keep an eye on the reception for marines and other ship personnel who come to request your service. As your job is working on the ship, you should be providing your custom ordnance to the ground troops for use. Using the labeler is recommended to leave helpful information for how to use them.
Tools of the Trade
| Picture | Name | Simple explanation |
|---|---|---|
 |
Autolathe | The autolathe can be used to print a lot of useful things, such as assembly components, beakers, buckets. Other personnel who does not have access to an autolathe may also come to the reception to request something to be printed for them. |
 |
Armylathe | The armylathe is a specialized USCM autolathe meant for printing parts to construct various ordnance, such as grenade casings and mortar shells. These parts are printed empty, and you must add a detonator assembly and chemical filling separately. |
 |
Demolition Simulator | So that you do not need to blow up the ship, this computer was designed to simulate the effects of demolitions in a safe virtual environment. Because the simulations take a lot of processing, the processors must cool down for 2 minutes between each simulation. |
 |
Demolition Scanner | Because visual information may not be enough, this hand-held reagent scanner has been specially designed for providing quantitative data of your bombs. It can report explosive and fire hazards from chemical containers and explosive casings, including explosive and fire intensity. If used on an explosive casing, it will take all chemical containers in the casing and its capacities into account. However, it cannot predict effects such as shrapnel or fire burn duration nor predict hazards caused from immediate chemical reactions. Use the scanner in-hand to print the latest scan. |
 |
Industry Grinder | The most powerful grinder on the ship. You will need this to grind down phoron and various metals from storage. You can also use this to dispose of specific unwanted reagents in your containers should you make an error. |
 |
Component Storage Machine | A large storage machine containing various components. Contains assembly components and containers for you to get started before you need to start printing new ones. |
 |
Electronics Vendor | A vendor containing various things for dealing with electronics. You won't need this much, but other personnel may come to request stuff from it. |
 |
Tool Storage Machine | Contains many spare tools, devices and equipment needed for engineering work. Should you somehow lose your essential equipment, you can find replacements here. Other personnel might also come around to request stuff from it. |
 |
Industry Freezer | A powerful fine tuned freezer used to polymerize chemicals in the cold. This one is set to the perfect temperature for paraformaldehyde polymerization. The freezer must be kept closed for polymerization. At the beginning of the mission you will find a large silver beaker inside, which can be used as a silver catalyst. If you lose this, you can make more from silver bars. |
 |
Chemical Storage Tank | A large capacity chemical storage tank that can store up to 1000 units. In the storage room you have tanks for oxygen, sulfuric acid, water, polytrinic acid, ammonia, methane, hydrogen, and fuel. Can be un-anchored for moving it around. Click with an empty hand to quickly change the transfer amount. If you need to refill it, you must change the transfer direction. |
Crafting Demolitions
As an Ordnance Technician you have the necessary skills for crafting custom demolitions (chembombs) to improve the USCM arsenal. The types of bombs you can make range from small / large grenades, mines, plastic explosives, and warheads for rockets / mortar shells. All of these follow a similar pattern of construction: printing the necessary casing from the autolathe, adding a detonator assembly, adding up to two containers with chemicals, and locking the bomb to finish. With the right combination of chemicals, they can all be made significantly stronger than their standard issue counterparts.
Bomb Casings
| Picture | Description | Printing Cost | Container Size | Explosive Capacity | Combustive Capacity |
|---|---|---|---|---|---|
 |
Claymore (M20) - Useful for setting up traps. - Will always trigger from tripwire. - Detonator assembly may contain proximity sensor for increased trigger range (use only igniters for tripwire trigger only). - Tripwire and proximity sensor has IFF. - Must be planted on the ground to detonate. - Can be disarmed with a multitool. |
4687 metal (1.2 sheets) |
120 | Power: 105 Falloff: 25 Shards: 32 |
Intensity: 3-12 Radius: 2-5 Duration: 3-18 |
 |
Grenade (M40) - Smaller capacity and explosive potential than the M15. - Fits in grenade launchers. - Detonator assembly can use timers. |
4687 metal (1.2 sheets) |
60 | Power: 175 Falloff: 35 Shards: 32 |
Intensity: 3-20 Radius: 1-5 Duration: 3-24 |
 |
Grenade (M15) - Higher capacity and explosive potential than the M40. - Does not fit in grenade launchers. - Detonator assembly can use timers. Description |
8750 metal (2.3 sheets) |
120 | Power: 215 Falloff: 40 Shards: 32 |
Intensity: 3-20 Radius: 1-5 Duration: 3-24 |
 |
Plastic Explosive (C4) - An improvised explosive with a plastic casing. - Useful for setting up traps. - Detonator assembly can contain timer, proximity sensor or remote signaler. - Proximity sensor has IFF. - Small guaranteed explosion even without chemicals. - Must be planted on an object to detonate. - Can be disarmed with a multitool. |
9375 metal (2.5 sheets) 2500 plastic (1 sheet) |
240 | Power: 260 Falloff: 45 Shards: 32 |
Intensity: 4-30 Radius: 2-7 Duration: 5-36 |
 |
Rocket (84mm) - Must be launched with the M5 RPG. - Assembled with an 84mm rocket warhead and rocket tube. - Warhead must contain assembly of two detonators. - Rocket tube must contain 60 units of methane fuel. |
Warhead 14062 metal (3.7 sheets) Tube 9375 metal (2.5 sheets) |
240 | Power: 350 Falloff: 50 Shards: 64 |
Intensity: 4-30 Radius: 2-7 Duration: 5-36 |
 |
Mortar Shell (80mm) - Must be launched with the M402 Mortar. - Assembled with an 80mm mortar shell and mortar warhead. - Warhead must contain assembly of two detonators. - Mortar shell must contain 60 units of hydrogen fuel. |
Warhead 14062 metal (3.7 sheets) Shell 23437 metal (6.2 sheets) |
300 | Power: 430 Falloff: 30 Shards: 128 |
Intensity: 5-40 Radius: 3-8 Duration: 5-48 |
Detonation Assemblies
Detonation assemblies can be made by mixing the components below in various ways. The components has two possible states: locked or ready for attachment. Use a screwdriver to switch between the states. When locked, you can use the assembly to change the settings of any sensors inside. The assembly must be locked to attach it to a bomb.
| Picture | Name | Explanation |
|---|---|---|
 |
Igniter | At least one igniter is required in all detonation assemblies. Two igniters can be combined for instant detonation when primed. When primed, the igniter will ignite the contents of the bomb, causing an explosion or combustion (or both), depending on the chemical contents of the bomb. |
 |
Proximity Sensor | When activated, the proximity sensor will detect movement within the defined radius. When a non IFF target is detected, it will trigger after the defined delay, priming the igniter. |
 |
Remote Signaler | When activated, all other signalers using the same frequency will trigger. Signaler bombs should thus be provided with a separate signaler. |
 |
Timer | When activated, the timer will trigger after the specified time. |
Explosions and Fire
Ordnance Technicians are not chemists and can not make medicine. But they are familiar enough with chemistry to know how to make things go bang. Beware that some chemicals can be sensitive, spontaneously igniting when more than a certain amount is mixed at the same time (! = 60u, !! = 5u, !!! 0u). If research has been making custom explosive chemicals for you, then they will always have some sensitivity. Make sure they tell you about this. Below a chart for all the chemical reactions you need to know. And a list of all chemicals that can be used in explosions and fire, and how they modify said explosions and fire. Additionally, iron can be used to make shrapnel and phoron can be used to make incendiary shrapnel.
| Name | Power Mod | Falloff Mod | Intensity Mod | Radius Mod | Duration Mod | Burn Color Mod |
|---|---|---|---|---|---|---|
| Ammonium Nitrate | 0.4 | 16 | 0.5 | 0 | -0.2 | Orange |
| ANFO | 1 | 12 | 0 | 0 | 0 | None |
| Carbon | 0 | 0 | 0 | 0 | 0.8 | Gold |
| Chlorine Trifluoride | 0 | 0 | 1.5 | -0.075 | -1 | Dark Orange |
| Copper | 0 | 0 | 0 | 0 | 0 | Green |
| Cyclonite | 1.5 | 8 | 0 | 0 | 0 | None |
| Ethanol | 0 | 0 | 0.2 | 0.1 | 0.25 | Blue |
| Hexamine | 0 | 0 | 0 | 0 | 0.5 | Orange |
| Hydrogen | 0.15 | 12 | -0.75 | 0.14 | -0.5 | Light cyan |
| Lithium | 0 | 0 | 0.15 | 0 | 0 | Deep pink |
| Methane | 0.15 | 12 | -1 | 0.1 | 0 | Dark blue |
| Napalm | 0 | 0 | 0.4 | 0.085 | 1 | Light orange |
| Nitroglycerin | 1 | 8 | 0 | 0 | 0 | None |
| Octogen | 2 | 4 | 0.5 | 0 | -0.2 | Orange |
| Oxygen | 0 | 0 | 0.75 | -0.075 | 0 | Light Blue |
| Phoron | 0 | 0 | 0.3 | 0.05 | -0.75 | Dark red |
| Phosphorus | 0 | 0 | 1 | -0.12 | 0.1 | Peach |
| Potassium-chloride | 0 | 0 | 0.1 | 0 | 0 | Purple |
| Potassium-hydroxide | 0.5 | 16 | 0 | 0 | 0 | None |
| Sodium-chloride | 0 | 0 | 0.1 | 0 | 0 | Yellow |
| Thermite | 0.5 | 12 | 0.25 | -0.1 | 1 | Light orange |
| Welding Fuel | 0.12 | 12 | 0.15 | -0.075 | 0.75 | Orange |
Maintaining the Orbital Cannons
| Orbital Cannon: | Description: | ||||||||
|---|---|---|---|---|---|---|---|---|---|
|
Used for firing warheads at any currently orbited planets or nearby stations. It accelerates its payload with solid fuel for devastating results upon impact.
|
Maintaining the Dropships
As an Ordnance Technician, your faster use of the powerloader and inferior rank to the Pilot Officer means you are expected to load their dropships up for them. Head to the hangar, grab a powerloader (click-drag yourself onto it, or right click -> enter powerloader), and ask them what needs loading and where. Pickup the desired modules and attach them onto the appropriate port on the dropship. Communicate with the Pilot Officer in person or over the engineering channel to print new equipment from the dropship fabricator in the future, and be ready to reload their ordinance (Use an empty ripley clamp to take out expended ammunition then use the other hand to load a fresh batch of ammo, for example: 30mm, mini rockets etc.) when they return from close air support missions.
If the dropships seats have been flattened you can re-build them by using a 
welder and then a 
wrench.
Special Duties
Because of your engineering skills, you may occasionally be tasked to perform other duties such as ship maintenance, vehicle maintenance, or FOB duty. You will find the guide to engineering and guide to construction useful for this.
Maintaining the Vehicles
As an ordnance technician you are capable of repairing and replacing vehicle modules. The Vehicle Crewmen will usually take care of this themselves, but special circumstances may require you to assist. Remember to check with the vehicle crewman about which modules they'd like attached.
FOB duty
Command may find it necessary to send a few OTs down to the FOB to keep it running, repaired, and ready for action. Keep in touch with your Chief Engineer as much as possible when deploying. The Squad Engineers will be subordinate to you, so should it be necessary, you can order them around on FOB related matters; try to have them do any dangerous frontline work.
Grunt Work
You may get ordered to replace lights, do cleaning, or look through the disposals room for anything valuable tossed away, because of your maintenance access and not being a particularly busy. Don't whine about it
Almayer Projects
If you've gotten chamber sick from the workshop, you can always ask for the proper legal authorization to construct or modify a part of the Almayer to occupy yourself with something creative. If you can't think of what to create, ask for ideas from other folks or just explore the Almayer until an idea pops into your head.
Your Skillset
To find out about how the skill system works head over to the skills system page.
Reading and Sources
There are no current guides or discussions for Ordnance Technicians at the moment. Why don't you make one?