Guide to construction

Construction

Defences

Construction Type:	How To Build It:	Requirements:	Finished Product:
Table	Pick up metal/wooden planks with your active hand (Hand must be empty) Click on metal sheets Select the table under the construction list (Do not move during this or you won't build it) Pick up table parts Click on table part to finish table	2 Metal Sheets or 2 Wooden Planks	1 Table
Reinforced Table	Follow guide to make a table. Follow guide to make rods. Have Rods in your active hand. Click on the table in your other hand.	2 Metal Sheets and 2 Rods	1 Reinforced Table
Grilles	Pick up rods or create them from metal construction list. Stand where you would like your grille. Click on the rods in your hand	4 Rods	1 Grille
Wooden Barricade	Pick up Wooden Planks with your active hand (Hand must be empty) Click on the Wooden Planks Select the Wooden barricade under the construction list (Do not move during this or you won't build it)	5 Wooden Planks	1 Wooden Barricade
Metal Barricade	Pick up Plasteel sheets with your active hand (Hand must be empty) Click on the Plasteel sheets Select the metal barricade under the construction list (Do not move during this or you won't build it, also make sure to face the direction you want the barricade to block projectiles from.)	5 Plasteel Sheets	1 Metal Barricade
Rack	Pick up Metal sheets with your active hand (Hand must be empty) Click on Metal sheets. Select the Rack under the construction list.	1 Metal Sheet	1 Rack

Floors

Construction Type:	How To Build It:	Requirements:	Finished Product:
Lattice	Pick up rods in your active hand (Your hand must be empty) Click on a space tile with the rods.	Rods
Catwalk	Follow guide to make a lattice. Pick up Rods in your active hand (Your hand must be empty) Click on the lattice	Rods	File:Catwalk.png
Plating	Follow guide to make a lattice. Pick up Floor tiles in your active hand (Your hand must be empty) Click on the lattice.	Floor tiles	File:Plating.png
Reinforced Floor	Follow guide to make plating Pick up Rods in your active hand (Your hand must be empty) Click on plating	Rods
Steel Floor	Follow guide to make plating Pick up Metal sheets in your active hand (Your hand must be empty) Click on the Metal sheets. Select Floor tiles under the construction list Pick up Floor tiles in your active hand (Your hand must be empty) Click on plating	Floor tiles
Wooden Floor	Follow guide to make plating Pick up Planks in your active hand (Your hand must be empty) Click on the Planks. Select Wood tiles under the construction list Pick up Wood tiles in your active hand (Your hand must be empty) Click on plating	Planks Wood tile
Carpeted Floor	Follow guide to make plating Pick up carpet tiles in your active hand (Your hand must be empty) Click on plating	Carpet Tiles
Light Floor	Follow guide to make plating Click on glass with cable coil in your active hand. Click on the new tile you create with metal in your active hand. Pick up light floor you just made and hold it in your active hand. Click on plating	Glass Cable Coil Metal

Walls

Construction Type:	How To Build It:	Requirements:	Finished Product:
Girder	Pick up metal with your active hand (Hand must be empty) Click on metal sheets Select the girder under the construction list (Do not move during this or you won't build it)	4 Metal Sheets	1 Girder secured to the ground on your tiles
Wall	Follow guide to make a girder Click on girder with metal sheets (Do not move during this or you won't build it)	6 Metal sheets (4 for the girder 2 for the wall)	1 Wall
False Wall	Follow guide to make a girder Use your crowbar to unsecure the girder Click on unsecure girder with metal	6 Metal Sheets (4 for the girder 2 for the wall)	1 False Wall (Acts like a door)

Wall Mountings

Construction Type:	How To Build It:	Requirements:	Finished Product:
APC	Pick up Metal sheets with your active hand (Hand must be empty) Click on Metal sheets. Select APC frame under the construction list. Use the frame on the wall you want the APC on (may only be placed in areas which have been defined as a Station Area using the Chief Engineer's Station Blueprints). Click on the APC with cable coil. Click on the APC with a Power Control Module. Screwdriver the APC. Click on the APC with a powercell. Click the APC with a Crowbar. It starts ID locked, with the cover engaged and the main switch turned off.	1 Screwdriver 2 Metal sheets 1 Roll of Cable coil 1 Power control module 1 Crowbar 1 Power Cell	1 APC
Air Alarm	Pick up Metal sheets with your active hand (Hand must be empty) Click on Metal sheets. Select Air alarm frame under the construction list. Pick up the Air alarm frame and click on the desired wall with it in your active hand. Pick up the Air alarm electronics and click on the now wall mounted Air alarm frame. Click on the Air alarm with wire in your active hand. Use a screwdriver on the Air alarm to finish it.	1 Roll of Cable coil 2 Metal sheets 1 Screwdriver 1 Air alarm electronics	1 Air AlarmFile:AirAlarm.png
Fire Alarm	Pick up Metal sheets with your active hand (Hand must be empty) Click on Metal sheets. Select Fire alarm frame under the construction list. Pick up the Fire Alarm frame and click on the desired wall with it in your active hand. Pick up the Fire alarm electronics and click on the now wall mounted Fire alarm frame. Click on the Fire alarm with wire in your active hand. Use a screwdriver on the Fire alarm to finish it.	1 Roll of Cable coil 2 Metal sheets 1 Screwdriver 1 Fire alarm electronics	1 Fire Alarm
Security Camera	Use the autolathe to create a Camera Assembly. Place the camera assembly on the tile where'd you like the camera to be. Click on the camera with a Wrench. Use a welder on the camera.. Use Cable coil on the camera. Use a Screwdriver on the camera to complete it. Set camera network (default is SS13) Set camera direction	1 Screwdriver 1 Autolathe 1 Welder 1 Roll of Cable coil 1 Wrench	1 Security Camera
Light Fixture	Pick up Metal sheets with your active hand (Hand must be empty) Click on Metal sheets. Select Light tube frame or Light bulb frame under the construction list. Click on the wall with the light frame you made. Use cable coil on the light frame. Use a screwdriver on the light frame. Use a light tube or light bulb for small fixtures.	2 Metal sheets for a light tube frame. or 1 Metal sheets for a light bulb frame. 1 Roll of Cable coil 1 Screwdriver 1 Light Tube or 1 Light Bulb

Normal Windows/Reinforced Windows

Construction Type:	How To Build It:	Requirements:	Finished Product:
Normal Windows	Pick up Glass sheets with your active hand (Hand must be empty) Click on Glass sheets. Choose one direction or full window. Pull to desired location. Right click to rotate the one directional glass. (Skip if full window) Use a screwdriver on the Full window/one directional window.	Glass Screwdriver
Reinforced Windows	Pick up Rods with your active hand (Hand must be empty) Click on Glass sheets. Pick up Reinforced glass sheets with your active hand (Hand must be empty) Choose one direction or full window. Pull to desired location. Right click to rotate the one directional glass. (Skip if full window) Use a screwdriver on the Full window/one directional window. Use a crowbar on the Full window/ one directional window. Use a screwdriver on the Full window/one directional window.	Screwdriver Crowbar Rods Glass Reinforced glass

Other

Construction Type:	How To Build It:	Requirements:	Finished Product:
Rods	Pick up metal with your active hand (Hand must be empty) Click on metal sheets Select the rods under the construction list	1 Metal Sheet	2 Rods
Airlock	Pick up Metal sheets with your active hand (Hand must be empty) Click on Metal sheets. Click on Airlock assembly in the construction list. Click on the Airlock assembly with a wrench in hand to secure it in the desired location. You can use a Pen to name the airlock by clicking on the airlock with a pen in your active hand. If you add Reinforced Glass to the airlock it makes a glass airlock. Click on the airlock with cable coil in your active hand. Use the Airlock Electronics Board and set the access level. Add the Airlock Electronics Board to the airlock frame. Screwdriver to finish.	Metal Sheets 1 Role of Cable Coil 1 Screwdriver	1 Airlock
Emergency Shutters:	Pick up Metal sheets with your active hand (Hand must be empty) Click on Metal sheets. Click on Emergency shutter assembly in the construction list. Wrench it in place. Use cable coil on the Emergency shutter assembly. Click on the Emergency shutter assembly with Air Alarm Electronics in you active hand.	Metal sheets 1 Role of Cable Coil 1 Wrench 1 Air Alarm Electronics.	1 Emergency ShutterFile:Hazard Door.png
Windoor	Pick up Reinforced Glass sheets with your active hand (Hand must be empty) Click on Reinforced Glass sheets. Click on Windoor in the construction list. Use a Wrench on the windoor. (Optional)Use Rods to create a secure windoor. Use cable coil on the windoor. Use Airlock Electronics on the windoor. Use a Crowbar on the windoor.	1 Wrench 1 Airlock Electronics. 1 Role of Cable Coil Reinforced Glass sheets 1 Crowbar	1 Windoor
Computer	Pick up Metal sheets with your active hand (Hand must be empty) Click on Metal sheets. Click on Computer frame in the construction list. Use a wrench on the computer frame. Insert the circuitboard of your choosing. Use a Screwdriver on the computer. Use a roll of cable on the computer. Use Glass sheets on the computer. Use a screwdriver on the computer to finish it.	Metal sheets Glass sheets 1 Role of Cable Coil 1 Screwdriver 1 Wrench	1 Computer
Construction Type:	How to build it:	Requirements:	Finished Product:
Construction Type:	How to build it:	Requirements:	Finished Product:

Machines

• If you want to build a gas cooler or gas heater, don't forget to face the direction in which you want the machine to connect.

Construction Type:	How To Build It:	Requirements:	Finished Product:
Autolathe	Pick up Metal sheets with your active hand (Hand must be empty) Click on Metal sheets. Click on machine frame in the construction list. Use cable coil on the frame. Add the desired circuit board. Add 2 Pieces of Cable. Add 1 Manipulator. Add 3 Matter bins. Add 1 Console screen. Use a Screwdriver on the machine frame.	Metal sheets 1 Screwdriver 1 Roll of cable coil 1 Autolathe circuit board 1 Manipulator 3 Matter bins 1 Console screen	1 Autolathe
Protolathe	Pick up Metal sheets with your active hand (Hand must be empty) Click on Metal sheets. Click on machine frame in the construction list. Use cable coil on the frame. Add the desired circuit board. Add 2 Manipulator. Add 2 Matter bins. Add 2 Small beakers. Use a Screwdriver on the machine frame.	Metal sheets 1 Screwdriver 1 Roll of cable coil 1 Protolathe circuit board 2 Manipulator 2 Matter bins 2 Small Beakers	1 Protolathe
Destructive Analyzer	Pick up Metal sheets with your active hand (Hand must be empty) Click on Metal sheets. Click on machine frame in the construction list. Use cable coil on the frame. Add the desired circuit board. Add 1 Manipulator. Add 1 Scanning Module Add 1 Micro laser Use a Screwdriver on the machine frame.	Metal sheets 1 Screwdriver 1 Roll of cable coil 1 Destructive Analyzer circuit board 1 Manipulator 1 Micro laser 1 Scanning Module	1 Destructive Analyzer
Circuit Imprinter	Pick up Metal sheets with your active hand (Hand must be empty) Click on Metal sheets. Click on machine frame in the construction list. Use cable coil on the frame. Add the desired circuit board. Add 1 Matter bin Add 1 Manipulator Add 2 Small beakers Use a Screwdriver on the machine frame.	Metal sheets 1 Screwdriver 1 Roll of cable coil 1 Circuit Imprinter circuit board 1 Matter bin 1 Manipulator 2 Small beakers	1 Circuit Imprinter
Subspace Broadcaster	Pick up Metal sheets with your active hand (Hand must be empty) Click on Metal sheets. Click on machine frame in the construction list. Use cable coil on the frame. Add the desired circuit board. Add 1 Pieces of Cable Add 2 Manipulators Add 1 Subspace crystal Add 1 Subspace filter Add 2 High-powered Micro laser Use a Screwdriver on the machine frame.	Metal sheets 1 Screwdriver 1 Roll of cable coil 1 Subspace Broadcaster circuit board 1 Pieces of Cable 2 Manipulators 1 Subspace crystal 1 Subspace filter 2 High-powered Micro laser	1 Subspace BroadcasterFile:Broadcaster.gif
Subspace Receiver	Pick up Metal sheets with your active hand (Hand must be empty) Click on Metal sheets. Click on machine frame in the construction list. Use cable coil on the frame. Add the desired circuit board. Add 1 Pieces of Cable Add 2 Manipulators Add 1 Scanning Module Add 1 Micro laser Add 1 Subspace filter Add 1 Subspace ansible Use a Screwdriver on the machine frame.	Metal sheets 1 Screwdriver 1 Roll of cable coil 1 Subspace Broadcaster circuit board 2 Manipulators 1 Scanning Module 1 Micro laser 1 Subspace filter 1 Subspace ansible	1 Subspace BroadcasterFile:Broadcaster.gif

Deconstruction

Deconstruction Type:	How To Deconstruct It:	Requirements:	Materials You Get Back:
Girder	Pick up wrench with your active hand (Hand must be empty) Click on girder. (Do not move during this or you won't deconstruct it.)	1 Wrench	1 Metal Sheets
Wall	Pick up welder with your active hand (Hand must be empty and you should be wearing goggles or a welding helmet.) Click on the wall with a welder. (Do not move during this or you won't deconstruct it) Either crowbar or wrench the girder. Crowbarring the girder will displace the girder which allows you to move it around. Wrenching the girder will completely disassemble it into metal sheets.(See Girder deconstruction above.)	1 Welder and 1 Wrench	Fully deconstructed the wall will give 3 Metal Sheets If only deconstructed down to the girder it will give 2 metal sheets
False Wall	Same as Wall deconstruction.	1 Welder and 1 Wrench	Fully deconstructed the wall will give 3 Metal Sheets If only deconstructed down to the girder it will give you only 1 metal sheet
Table	Pick up wrench with your active hand (Hand must be empty) Click on the table. If you then click on the flat packed table you can deconstruct it.	1 Wrench	1 Flat Packed Table If you deconstruct the flat packed table you'll get 2 metal sheets.
Reinforced Table	Pick up welder with your active hand (Hand must be empty) Click on Reinforced Table with the welder. (Do not move during this or you won't deconstruct it) Same as table deconstruction after the Reinforced table has been welded.	1 Wrench and 1 Welder	1 Flat packed table If you deconstruct the flat packed table you'll get 2 metal sheets.
Rods	Pick up welder with your active hand (Hand must be empty) Click on 2 Rods.	1 Welder	1 Metal Sheet
Grilles	Pick up wirecutters with your active hand (Hand must be empty) Click on grille with wirecutters.	1 Wirecutter	2 Rods
Wooden Barricade	Bash the wooden barricade with any old object, preferably a weapon of sorts.	Some sort of weapon.	2 wooden planks
Metal Barricade	Pick up Screwdriver with your active hand (Hand must be empty) Click on the Plasteel Barricade. Pick up Wrench with your active hand (Hand must be empty) Click on Plasteel Barricade. Pick up Crowbar with your active hand (Hand must be empty) Click on Plasteel Barricade.	1 Screwdriver 1 Wrench 1 Crowbar	5 Plasteel will be returned upon deconstruction of a full health barricade. Amount of plasteel refunded from barricades is proportional to remaining health (aka 0 plasteel if the barricade is broken).
Rack	Pick up Wrench with your active hand (Hand must be empty) Click on Rack with Wrench in hand.	1 Wrench	1 Metal sheet
APC	Hold your engineering ID with your active hand (Hand must be empty) Click on the APC with your ID to unlock it. Alternatively, if the APC is broken (tilted and cracked cover), try using your combat knife or gun to smash off the cover. Click on the APC with an empty hand to remove the power. Click on the APC with a Screwdriver to unsecure electronics. Click on the APC with Wirecutters to cut the cables. (If you can't cut the wires skip to step 6) Click on the floor tile directly below the APC with a Crowbar. Click on the APC with a Crowbar to remove Power Control Board. Use a Welder on the APC to remove it from the wall. Wrenching the frame, that is now detached from the wall.	1 Screwdriver 1 Crowbar 1 Wirecutters 1 Welder	2 Metal sheets 5 cable lengths.
Airlock	Pick up Screwdriver with your active hand (Hand must be empty) Click on the airlock with your screwdriver. Use multitool and/or wirecutters to disable the power whilst keeping the doorbolts up. Click on the airlock with a welder to weld it shut. Click on the airlock with a Crowbar to take out the electronics. Use wirecutters on the airlock to cut the cables out. Use a Wrench on the airlock to unsecure it. Weld the airlock to deconstruct it into metal sheets.	1 Welder 1 Wrench 1 Screwdriver 1 Wirecutter 1 Crowbar 1 Multitool	Metal sheets Cable lengths Airlock electronics