Maintenance Technician

ENGINEERING

Maintenance Technician

Difficulty: Medium Supervisors: Chief Engineer Rank: Private First Class Duties: Keep the S-52 Fusion Reactors powered. Maintain and modify the Almayer and its dropships. Guides: S-52 Fusion Reactor, Construction, Guide to Engineering Unlock Requirements: None Detailed Description: |__________| Your job is to make sure the ship is clean and the powergrid is operational. Start with the ship's engine, and don't forget radiation equipment. As the maintenance tech you answer to the chief engineer. Special circumstances may change this. |__________|

"The intakes are clogged. We overheated and burned out a whole cell... Christ, it's really breaking loose down here..."
― Corporate Engineer Brett, Alien

The Maintenance Technician (MT) is an enlisted USCM crewmember of the USS Almayer's engineering department. Trained in all types of engineering work and directly supervised by the commissioned Chief Engineer, they are responsible for maintaining the vessel: repairing broken S-52 reactors with their toolbelt, reloading the dropships with powerloaders, cleaning the halls with a mop and bucket, and much more. With proper authorization, they can also help out with various construction projects, whether on the ship or at the FOB.

Overview

---

You begin the mission in the engineering department at the back of the ship. Reach out over the engineering radio (:n) to report to your department, composed of fellow Maintenance Technicians and the Chief Engineer, whose orders you must carry out. The lockers, crates, vendors, and tables strewn around your workplace should have everything you need for the mission. There are also many rooms maintenance rooms and engineering outposts strewn around the Almayer with supplies for emergency repair.

Hacking

---

In emergency situations, or when legally authorized by command, you might find it necessary to hack your way through obstacles. For most hacking jobs, you will want to be wearing insulated gloves to protect against shock, pry open a panel with the screwdriver, and then use a multitool and wirecutters as necessary.

Airlocks

---

Tampering with airlocks can have shocking results that might lead to a crushing defeat, make sure to warn others around you of the danger, whether verbally, over the radio, or with some engineering tape. Don't leave an airlock electrified or with its safety off without a good reason!

Some common hacks you can perform are:

• Dropping the bolts to force the door to stay closed. To do this, pulse each wire until you see "the bolts have dropped!" at the bottom of the hacking interface.
• Forcing the door open. To do this, pulse each wire until you see "the test light is off!" at the bottom of the hacking interface. Make sure that if you pulse the bolts wire, you pulse it back up right after, since you won't be able to open a bolted door. Then quickly use your crowbar on the door to pry it open before power comes back online. If you want to keep it open forever, just pulse the bolts down once it's open.
• Set the door to close immediately after it is opened, rather than wait the usual 15 seconds. To do this, pulse wires (and reset them when necessary, by either pulsing again or by cut-and-mending) until you reach the "check timing mechanism" wire.

Vendors

---

The two hacks you'll want to perform are pulsing the contraband wire to release extra gear, or cutting the access wire to allow anyone to use the vendor. Don't leave a vendor electrified without a good reason!

Screwdriver the vendor, then Pulse until the extra items show up (note that some vendors won't have any extra items even if you pulse the contraband wire.) in the vendor list. Keep the wire colours in mind, since they're all universal for that round. Sometimes when you pulse a wire a shock will come out. In this case, you'll want to cut the wire with wirecutters and then mend it, after which you can move onto the next wire. Problem solved.

Supply Console

---

The Requisitions Officer might request for you to modify their Supply Console at the chip level to allow for the procurement of contraband goods. To do this, deconstruct the Supply Console by using the screwdriver, crowbar, wirecutters, screwdriver, crowbar in that order to get the Supply Console chip out. Pulse the access to BROAD on the chip with a multitool. Finally, place the chip back into the console, and then apply a screwdriver, cable coil, glass, and screwdriver again to complete the console.

Maintaining the Dropships

---

As a Maintenance Technician, your faster use of the powerloader and inferior rank to the Pilot Officer means you are expected to load their dropships up for them. Head to the hangar, grab a powerloader (click-drag yourself onto it, or right click -> enter powerloader), and ask them what needs loading and where. Pickup the desired modules and attach them onto the appropriate port on the dropship. Communicate with the Pilot Officer in person or over the engineering channel to print new equipment from the dropship fabricator in the future, and be ready to reload their ordinance (Use an empty ripley clamp to take out expended ammunition then use the other hand to load a fresh batch of ammo, for example: 30mm, mini rockets etc.) when they return from close air support missions.

If the dropships seats have been flattened you can re-build them by using a welder and then a wrench.

Maintaining the Vehicles

---

As a maintenance technician you'll be able to repair and replace vehicle modules when needed. If the Vehicle Crewmen are currently unavailable to repair them, you'll be there to help.

Problem:	Repairing and Replacing:
Broken M577 Armoured Personnel Carrier	The broken APC. It's useless without any proper armament. It can't move at all when it's been this badly damaged. Although it can just barely move with broken or no wheels. It'll take a lot of work just to fix it, and you'll need spare parts and properly trained people to do so. The replacement parts are costly, you better make sure they don't go to waste!
Repairing the vehicle frame	Repair the frame with a welder 3 times (depending on the damage) and use a wrench once.
Removing Modules from Hardpoints	Use a Crowbar to uninstall any modules from the their hardpoints.
Removing/Replacing the Tank's Turret	To replace the tank's turret, you'll need a powerloader. Get in the powerloader and click on the tank. Remove the turret and pickup the replacement turret. Click on the tank once more with the turret in the powerloader's clamp.

Maintaining the Orbital Cannons

---

Orbital Cannon:

Description:

Used for firing warheads at any currently orbited planets or nearby stations. It accelerates its payload with solid fuel for devastating results upon impact. Loading/Reloading: Load a warhead onto the Orbital Cannon Tray (Powerloader required). Load the required amount of solid fuel in the Orbital Cannon Tray (See Orbital Cannon Console). Note that each round the fuel consumption of each warhead is randomized. Open the Orbital Cannon Console's interface. Load the Tray into the Cannon. Chamber the Tray's content into the cannon barrel. (can't be undone!) Staff Officers can now fire the Orbital Cannon from their console. After firing, unload the Tray from the Orbital Cannon. Examine the Tray to make sure it is empty and operational. Repeat the process from the start to reload. Ammunition: Heavy Explosive: Causes a devastating explosion in a large radius upon impact with it's designated target. Incendiary: Releases a fiery payload over the targetted area. Extremely large radius. Cluster: Releases a cluster of explosives over the targetted area. To suppress any enemies advancing. Troubleshooting: If you've loaded a tray with an incorrect payload, you can still unload the tray's payload as long as it hasn't been chambered. If an incorrect payload is chambered, it can only be removed by firing it.

FOB duty

---

Command may find it necessary to send a few MTs down to the FOB to keep it running, repaired, and ready for action. Keep in touch with your Chief Engineer as much as possible when deploying. The Squad Engineers will be subordinate to you, so should it be necessary, you can order them around on FOB related matters; try to have them do any dangerous frontline work.

Hey Wait, This Is Grunt Work

---

Replacing lights, cleaning up stains, picking up trash, looking through the disposals room for anything valuable tossed away, and all types of crap work all falls under the realm of maintenance, and hence is your job. Pick up that mop and get sweeping.

Almayer Projects

---

If you've had enough of picking up other people's trash, you can always ask for the proper legal authorization to construct or modify a part of the Almayer to occupy yourself with something bigger and more creative. If you can't think of what to create, ask for ideas from other folks or just explore the Almayer until an idea pops into your head.

Your Skillset

To find out about how the skill system works head over to the skills system page.

Reading and Sources

There are no current guides or discussions for Maintenance Technicians at the moment. Why don't you make one?