Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Template:Rolling Encryption: Difference between revisions

Template page
mNo edit summary
m (adds how to convert hex to dex)
Line 5: Line 5:
|[[File:Encyption_Computers.png|256px]]
|[[File:Encyption_Computers.png|256px]]
| <br>
| <br>
| When the groundside comms relays are offline, squad and command announcements will become increasingly garbled over time. You can use the encryption computers to restore the announcement clarity; however, the restored clarity will still decay over time until the comms relays are brought back online.
| When the groundside comms relays are offline, '''squad and command announcements''' will become increasingly garbled over time. You can use the encryption computers to restore the announcement clarity; however, clarity once restored will still decay over time until the comms relays are brought back online.
<br>
<br>
To use these computers, you must be trained (level 1 or higher) in the Intel skill. This includes command, senior command, auxiliary support officer, and research staff.
To use these computers, you must be trained (level 1 or higher) in the Intel skill. This includes command, senior command, auxiliary support officers, and research staff.
<br><br>
<br><br>
Announcements lose 2.5% clarity every 30 seconds when comms are down. The minimum clarity is 45%, which happens after 10 minutes without comms or encryption. Clarity can be restored to a maximum of 95%.
Announcements lose 2.5% clarity every 30 seconds when comms are down. The minimum clarity is 45%, which happens after 10 minutes without comms or encryption. Clarity can be restored to a maximum of 95%.
Line 13: Line 13:
{| class="wikitable"
{| class="wikitable"
|-
|-
| <center><span style="color:#B200FF;">Purple</span></center>
| <center><span style="color:#B200FF;">'''Purple'''</span></center>
| <center>'''Encryption Decoder Computer'''<br>[[File:Decoder.png]]</center>
| <center><big>'''Encryption Decoder Computer'''</big><br>[[File:Decoder.png]]</center>
| '''This generates a challenge token from the current encryption stream.'''
| '''This generates a challenge token from the current encryption stream.'''
*Use the "Decode Current Stream" button to generate the encryption challenge token.
*Use the "Decode Current Stream" button to generate the encryption challenge token.
*Click the print button at the top right to punch and print the challenge token onto a punchcard.
*Click the print button at the top right to punch and print the challenge token onto a punchcard.
**'''OR''' manually enter the challenge token into the Cipher Computer's input by entering the decimal that corresponds to the desired hex.
**'''OR''' [[#Hex to Dec Converters|manually enter]] the challenge token into the Cipher Computer's input by entering the decimal that corresponds to the desired hex.
|-
|-
| <center><span style="color:#0026FF;">Blue</span></center>
| <center><span style="color:#0026FF;">'''Blue'''</span></center>
| <center>'''Encryption Cipher Computer'''<br>[[File:Cipher.png]]</center>
| <center><big>'''Encryption Cipher Computer'''</big><br>[[File:Cipher.png]]</center>
| '''This decrypts codes using a cipher phrase to create an encoded challenge phrase.'''
| '''This decrypts codes using a cipher phrase to create an encoded challenge phrase.'''
*Insert the challenge token punchcard into the Cipher Computer.
*Insert the challenge token punchcard into the Cipher Computer.
**'''OR''' manually enter the challenge token in the top input section from the Decoder Computer.
**'''OR''' [[#Hex to Dec Converters|manually enter]] the challenge token in the top input section from the Decoder Computer.
*Use the less-than "<" and greater-than">" symbols to cycle through the options until you decipher the challenge token.
*Use the less-than "<" and greater-than ">" symbols to cycle through the options until you decipher the challenge token into a word.
**If you inserted a punchcard and none of the settings create a word, then there may be a character that was incorrectly punched as a zero. This results in you almost getting a word, but having one letter (the erroneous zero) wrong. You can fix this by clicking and dragging up or down on the mispunched zero to adjust it to its proper value or manually entering the correct value.  
**If you inserted a punchcard and none of the settings create a word, then there may be a character that was incorrectly punched as a zero. This results in you almost getting a word, but having one letter (the erroneous zero) wrong. You can fix this by clicking and dragging up or down on the mispunched zero to adjust it to its proper value or manually entering the correct value from the Decoder Computer.  
*Once you have found the cipher word, note the "cipher setting," which will be a number between 0 and 26.
*Once you have found the cipher word, note the "cipher setting," which will be a number between 0 and 26.
*Use the print button at the top right to print the output of the deciphered challenge token onto a punchcard.
*Use the print button at the top right to print the output of the deciphered challenge token onto a punchcard.
**'''OR''' manually transfer the output to the Encoder Computer.
**'''OR''' [[#Hex to Dec Converters|manually enter]] the output to the Encoder Computer.
|-
|-
| <center><span style="color:#FF0000;">Red</span></center>
| <center><span style="color:#FF0000;">'''Red'''</span></center>
| <center>'''Encryption Encoder Computer'''<br>[[File:Encoder.png]]<br><br>[[File:Ping_Pong.png]]</center>
| <center><big>'''Encryption Encoder Computer'''</big><br>[[File:Encoder.png]]<br><br>[[File:Ping_Pong.png]]</center>
|  '''This uploads encoded phrases to restore announcement clarity.'''
|  '''This uploads encoded phrases to restore announcement clarity.'''
*Insert the deciphered challenge token punchcard into the Encoder Computer.
*Insert the deciphered challenge token punchcard into the Encoder Computer.
**'''OR''' manually enter in the Cipher Computer's output.
**'''OR''' [[#Hex to Dec Converters|manually enter]] in the Cipher Computer's output.
*Set the nob on the left to the "cipher setting" from the Cipher Computer.
*Set the nob on the left to the "cipher setting" from the Cipher Computer.
*Use the "Submit New Encoding" button to test your decrypted challenge token.
*Use the "Submit New Encoding" button to test your decrypted challenge token.
**If your "PING" generates a "PONG," then announcement clarity has been restored to 95%.
**If your "PING" generates a "PONG," then announcement clarity has been restored to 95%.
**If your "PING" only generates a partial "PONG," then too much time has passed, and your token is partially out of date, but announcement clarity has been partially restored.
**If your "PING" only generates a partial "PONG," then too much time has passed. This means your token is partially out of date, but announcement clarity is still partially restored.
**If you input a deciphered challenge token punchcard, then there is a chance that one character was incorrectly punched as a zero. This will cause your PING to fail. You can fix this by clicking and dragging up or down on the mispunched zero to adjust it to its proper value or manually entering the correct value.
**If you input a deciphered challenge token punchcard, then there is a chance that one character was incorrectly punched as a zero. This will cause your PING to completely fail. You can fix this by clicking and dragging up or down on the mispunched zero to adjust it to its proper value or [[#Hex to Dec Converters|manually enter]] the correct value.
|-
|-
| <center><span style="color:#FFFFFF;">White</span></center>
| <center><span style="color:#FFFFFF;">'''White'''</span></center>
| <center>'''Punchcards'''<br>[[File:Punchcard.png|256px]]</center>
| <center><big>'''Punchcards'''</big><br>[[File:Punchcard.png|256px]]</center>
|  
|  
*The Decoder and Cipher Computers each start loaded with 10 punchcards.  
*The Decoder and Cipher Computers each start loaded with 10 punchcards.  
*Four punch card stacks are on the table in front of the computers, each stack contains five punchcards.  
*Four punch card stacks are on the table in front of the computers, and each stack contains five punchcards.  
*More punchcard stacks can be found on the ground by Intelligence Officers.
*More punchcard stacks can be found on the ground by Intelligence Officers.
|}
====Hex to Dec Converters====
{| class="wikitable mw-collapsible"
|+ '''Hex to a Decimal Conversion Table'''
|-
! As a Hexcode !! As a Decimal
|-
| 0x00|| 0
|-
| 0x01|| 1
|-
| 0x02|| 2
|-
| 0x03|| 3
|-
| 0x04|| 4
|-
| 0x05|| 5
|-
| 0x06|| 6
|-
| 0x07|| 7
|-
| 0x08|| 8
|-
| 0x09|| 9
|-
| 0x0A|| 10
|-
| 0x0B|| 11
|-
| 0x0C|| 12
|-
| 0x0D|| 13
|-
| 0x0E|| 14
|-
| 0x0F|| 15
|-
| 0x10|| 16
|-
| 0x11|| 17
|-
| 0x12|| 18
|-
| 0x13|| 19
|-
| 0x14|| 20
|-
| 0x15|| 21
|-
| 0x16|| 22
|-
| 0x17|| 23
|-
| 0x18|| 24
|-
| 0x19|| 25
|-
| 0x1A|| 26
|}
<br>
{| class="wikitable mw-collapsible"
|+ '''In-Game Paper Version'''
|-
|  [h2]How to Convert a Hex to a Decimal[/h2]
[table][row][cell][b]Hex[cell][b]Decimal<br>
[row][cell]0x00[cell]0<br>
[row][cell]0x01[cell]1<br>
[row][cell]0x02[cell]2<br>
[row][cell]0x03[cell]3<br>
[row][cell]0x04[cell]4<br>
[row][cell]0x05[cell]5<br>
[row][cell]0x06[cell]6<br>
[row][cell]0x07[cell]7<br>
[row][cell]0x08[cell]8<br>
[row][cell]0x09[cell]9<br>
[row][cell]0x0A[cell]10<br>
[row][cell]0x0B[cell]11<br>
[row][cell]0x0C[cell]12<br>
[row][cell]0x0D[cell]13<br>
[row][cell]0x0E[cell]14<br>
[row][cell]0x0F[cell]15<br>
[row][cell]0x10[cell]16<br>
[row][cell]0x11[cell]17<br>
[row][cell]0x12[cell]18<br>
[row][cell]0x13[cell]19<br>
[row][cell]0x14[cell]20<br>
[row][cell]0x15[cell]21<br>
[row][cell]0x16[cell]22<br>
[row][cell]0x17[cell]23<br>
[row][cell]0x18[cell]24<br>
[row][cell]0x19[cell]25
|}
|}

Revision as of 05:28, 15 December 2025

Rolling Encryption for Groundside Announcements

Encyption Computers.png
When the groundside comms relays are offline, squad and command announcements will become increasingly garbled over time. You can use the encryption computers to restore the announcement clarity; however, clarity once restored will still decay over time until the comms relays are brought back online.


To use these computers, you must be trained (level 1 or higher) in the Intel skill. This includes command, senior command, auxiliary support officers, and research staff.

Announcements lose 2.5% clarity every 30 seconds when comms are down. The minimum clarity is 45%, which happens after 10 minutes without comms or encryption. Clarity can be restored to a maximum of 95%.

Purple
Encryption Decoder Computer
Decoder.png
This generates a challenge token from the current encryption stream.
  • Use the "Decode Current Stream" button to generate the encryption challenge token.
  • Click the print button at the top right to punch and print the challenge token onto a punchcard.
    • OR manually enter the challenge token into the Cipher Computer's input by entering the decimal that corresponds to the desired hex.
Blue
Encryption Cipher Computer
Cipher.png
This decrypts codes using a cipher phrase to create an encoded challenge phrase.
  • Insert the challenge token punchcard into the Cipher Computer.
    • OR manually enter the challenge token in the top input section from the Decoder Computer.
  • Use the less-than "<" and greater-than ">" symbols to cycle through the options until you decipher the challenge token into a word.
    • If you inserted a punchcard and none of the settings create a word, then there may be a character that was incorrectly punched as a zero. This results in you almost getting a word, but having one letter (the erroneous zero) wrong. You can fix this by clicking and dragging up or down on the mispunched zero to adjust it to its proper value or manually entering the correct value from the Decoder Computer.
  • Once you have found the cipher word, note the "cipher setting," which will be a number between 0 and 26.
  • Use the print button at the top right to print the output of the deciphered challenge token onto a punchcard.
Red
Encryption Encoder Computer
Encoder.png

Ping Pong.png
This uploads encoded phrases to restore announcement clarity.
  • Insert the deciphered challenge token punchcard into the Encoder Computer.
  • Set the nob on the left to the "cipher setting" from the Cipher Computer.
  • Use the "Submit New Encoding" button to test your decrypted challenge token.
    • If your "PING" generates a "PONG," then announcement clarity has been restored to 95%.
    • If your "PING" only generates a partial "PONG," then too much time has passed. This means your token is partially out of date, but announcement clarity is still partially restored.
    • If you input a deciphered challenge token punchcard, then there is a chance that one character was incorrectly punched as a zero. This will cause your PING to completely fail. You can fix this by clicking and dragging up or down on the mispunched zero to adjust it to its proper value or manually enter the correct value.
White
Punchcards
Punchcard.png
  • The Decoder and Cipher Computers each start loaded with 10 punchcards.
  • Four punch card stacks are on the table in front of the computers, and each stack contains five punchcards.
  • More punchcard stacks can be found on the ground by Intelligence Officers.

Hex to Dec Converters

Hex to a Decimal Conversion Table
As a Hexcode As a Decimal
0x00 0
0x01 1
0x02 2
0x03 3
0x04 4
0x05 5
0x06 6
0x07 7
0x08 8
0x09 9
0x0A 10
0x0B 11
0x0C 12
0x0D 13
0x0E 14
0x0F 15
0x10 16
0x11 17
0x12 18
0x13 19
0x14 20
0x15 21
0x16 22
0x17 23
0x18 24
0x19 25
0x1A 26


In-Game Paper Version
[h2]How to Convert a Hex to a Decimal[/h2]

[table][row][cell][b]Hex[cell][b]Decimal
[row][cell]0x00[cell]0
[row][cell]0x01[cell]1
[row][cell]0x02[cell]2
[row][cell]0x03[cell]3
[row][cell]0x04[cell]4
[row][cell]0x05[cell]5
[row][cell]0x06[cell]6
[row][cell]0x07[cell]7
[row][cell]0x08[cell]8
[row][cell]0x09[cell]9
[row][cell]0x0A[cell]10
[row][cell]0x0B[cell]11
[row][cell]0x0C[cell]12
[row][cell]0x0D[cell]13
[row][cell]0x0E[cell]14
[row][cell]0x0F[cell]15
[row][cell]0x10[cell]16
[row][cell]0x11[cell]17
[row][cell]0x12[cell]18
[row][cell]0x13[cell]19
[row][cell]0x14[cell]20
[row][cell]0x15[cell]21
[row][cell]0x16[cell]22
[row][cell]0x17[cell]23
[row][cell]0x18[cell]24
[row][cell]0x19[cell]25