Combat Technician

MARINE
Squad Engineer	Difficulty: Medium Supervisors: Squad Leader Rank: Not defined Duties: Set up defenses, babysit sentry guns, open doors and spam barbed wire. Guides: Construction, Guide to Engineering Unlock Requirements: Not available. Detailed Description: |__________| Not defined |__________|

But the good news — we got four of these robot sentries with display and scanners intact. They really kick ass, I think they'll come in handy. ―Corporal Hicks, Aliens

As a Squad Engineer, you main goals will be fixing power, getting through doors, and setting up fortifications for a FOB (Forward Operating Base) that'll be used for defence and to secure a supply route. Without you, your platoon will have no power or a FOB which is critical for mission success.

You'll have two different playstyles you can experiment with. One, as a FOB building and Utility Engineer, who sets up defences and makes sure power is running. Another way to play Engineer is to be a Combat Engineer, breaching walls, hacking open doors, and repairing robotic limbs on the field. Both are as good as the other, but too much of one is bad. Make sure there is an FOB that will be able to be defended, and if there is one, make sure marines will be able to effectively make it from building to building.

---

Equipment and Gear

---

As an Engineer, you'll have many things you'll be able to pickup. To start off, we'll talk about engineer coin items.

Defensive Equipment:	Description:
UA 571-C Sentry	The Sentry Gun automatically tracks and fires upon any target that is wearing an ID not hooked up to the Almayer's systems. Via IFF, they are unable to hit friendly marines, allowing them to be safely placed behind marine lines as they lay down suppressing fire. Comes with various options, such as burst fire, single shot and the ability to take control of it. Has 500 bullets. Ammunition: M30 Box Magazine (10x28mm Caseless) Contains 500 10x28 caseless rounds. Ammunition for the UA 571-C Sentry. To learn how to construct and use the sentries other features click here
M56D Mounted Smartgun	The M56D HMG is an emplacement that a marine will have to man in order to fire it. It fires heavier smartgun bullets that have increased penetration, at the downside of being immobile and not having IFF, allowing it to friendly fire. With CTRL-Click, you'll be able to toggle on burst fire. Holds 700 rounds. To learn how to construct and use the M56d's other features click here

As you can only pick one, discuss with your fellow engineering comrade for the one that best suits your needs. Moving on, the most important equipment, your tools as an engineer:

Image	Name	Function
	Screwdriver	Used for securing and unsecuring sentries, Also used to hack doors.
	Welding Tool	Used for cutting through walls and fixing sentries. Has 20 units of fuel inside.
	Crowbar	Used for Opening unpowered doors and displacing girders so you can move them.
	Wrench	Used for securing most objects to the ground including girders,vendors, also has another use to rotate sentries. Easily the most used tool in your arsenal.
	Cable coil	Used for fixing robotics and diverting power to other areas.
	Multitool	Used to hack doors/ vendors along with disabling mines.
	Wirecutter	Used for cutting cable coil and barbed wire, and mending it.

You'll want these in your toolbelt which can obviously be situated on your belt slot. Alongside these, you'll want to put some Insulated Gloves on your hands, and Welding Goggles over your eyes (which are able to be flipped up and down). Additionally, you'll get a webbing that you'll want to apply to your jumpsuit. For your backpack, you'll either want the Welderpack , the satchel , or the normal backpack

Extra Gear	Name	Function
	M40 HIDP Incendiary Grenade	Used for setting an area ablaze as area denial.
	C4	Used for exploding through walls or through people. Mostly used to blow into the CIC to mutiny.
	Minebox	Used for exploding aliens who run over it. Mostly used for killing survivors and exploding dead aliens.
	Circuit Boards	Used for fixing various things that need circuit boards, such as airlocks, APCs, and or air alarms.
File:Mesons.png	Optical Mesons	Used for seeing the layout of the ship through walls.
	Light Replacer	Used to replace lights quickly. Feed with glass to refill.
	Entrenching Tool	Used for digging and filling up sandbags, as well as deconstructing them. Can be folded to fit in a backpack.
	High-Capacity Powercell	Used for powering various devices that require power.

Tasks as an Engineer

---

Power Duty

As an Engineer, you'll be given a various amount of duties. Generally one of the first two duties is FOB or Power Duty. To setup power, you'll want to locate the geothermal generators and assess the damage. Depending on the sprite, the generator will need different steps:

= -> ->

= ->

=

With this done, you'll want to turn it on and set up the Superconducting Magnetic Energy Storages, (SMESes) which can be setup by clicking on them and setting input to 250,000W and output to 200,000W. This'll ensure that they are recieving more charge than they are giving out. Do this for all three, and make sure that the SMESes are charging before you head to your next objective.

Floodlight Repair

While you may have fixed the power for the colony, the xenomorphs will have most likely broken floodlights around the place which you'll need to fix. To fix a floodlight you'll want to use the following steps:

= -> -> -> ->

Hacking

Hacking sounds a lot harder than it actually is. To begin hacking a machine, follow these steps:

1. Open its maintenance panel if possible with a screwdriver.
2. If you have them on hand, you'll want to equip insulated gloves of some kind to protect against shock.
3. You will need a multitool and/or wirecutter to manipulate the internal wires. Click on the machine to open the menu with your chosen tool (Multitool/Wirecutter) then cut/pulse each wire until you get the desired result. Memorize the wire which produced that outcome for future reference; the wire functions are listed below.

If you accidentally turn off a machine's power, or activate its shock wire and need to reset it, simply cut and mend the shock/power wire.

The most common reason to hack by far is to depower and wrench open a door with the crowbar.

It should be noted that the wires which govern a machine's functions will be randomized each round, but are the same for all machines of the same type.

Lastly, it should be noted that you can rig wires with signallers that will pulse the wire they're attached to when emitting or receiving as a multitool. This can be used to create traps, such as closing and bolting a door, shocking it, or causing it to open and close rapidly. These traps will often serve to confine an enemy in a disadvantageous place where it cannot escape. This often works best when the target is forced to remain within the line of fire of a sentry.

There are several categories of machines you can hack. These are listed and included first to last in order of importance:

Airlock Wire Functions

1. ID wire: Pulsing will flash the 'access denied' red light; cutting will prevent anyone from opening the door if it's a restricted door; otherwise, it does nothing.
2. AI control wire: Pulsing will flash the 'AI control light' off temporarily; cutting will prevent the AI and cyborgs from accessing and controlling the door. Generally useless on Colonial Marines.
3. Main power wires (Test light wires): Pulsing will turn off the 'test light' and kill the power for 10 seconds; cutting will turn off the test light and make the door unusable until auxiliary power comes on. While a door is depowered, you can wrench it open with the crowbar.
4. Backup power wire: Pulsing will turn off the 'test light' kill the power for 10 seconds if the main power is out, otherwise, nothing. Cutting will obviously disable the backup power. There are two of these.
5. Bolt control wire: Pulsing will toggle the bolts; cutting will drop the bolts.
6. Door control wire: If the door is ID restricted, this is pretty much useless. If not, Pulsing will open/close the door and cutting will keep it that way, similar to bolting. Can be useful for setting up traps when wired to a signaler if the door is non-restricted.
7. Shock wire: Pulsing will electrify the door for 30 seconds; cutting will permanently electrify it until mended. This will cause the safety light to flash. You can find the wire easily because the door shoots sparks when pulsed or cut.
8. Safety wire: Pulsing will cause the safety light to flash red, causing anyone inside the airlock to be crushed when it closes. Cutting does nothing.
9. Timing wire: Pulsing will permanently change the door timing, making the door close faster. This can be useful in conjunction with disabling the safety wire if you intend to create an obstacle/trap, or make it more difficult to follow someone through the airlock. Cutting does nothing.

Vendor Wire Functions

1. Firing wire when cut or pulsed, causes the vendor to fire its contents at people. While this effect is active, the vendor's red light will blink.
2. Contraband wire does nothing when cut, when pulsed unlocks illegal or rare goods and turns on the green light.
3. Access wire when cut it toggles the purple/yellow light, allowing for ID restricted machines to be used by anyone. When the light is yellow it ignores ID restrictions.
4. Shock wire Toggles on the orange light, and electrifies the machine, causing anyone to operate or touch it to receive a shock.

APC Maintenance

If the APC is green or blue, it is good.

Replace Powercell

If APC is not broken and Power is down and you really want the APC to be working (e.g. Tcoms at first deployment), you can replace the powercell by:

1. Click the APC, swipe your ID card to unlock the interface.
2. Disengage the cover lock in the interface.
3. Use a crowbar on the APC to open the cover.
4. Take out the empty powercell out with an empty hand.
5. Put a new powercell in the APC.
6. Use a crowbar on the APC to close the cover.
7. Re-engage the cover lock.
8. Swipe your ID card to secure the interface.

Broken

1. Click the APC
2. Mend all wires with wirecutters.
3. Fix the cover with a screwdriver.

APC is fixed now but often it still has no power due to it takes time to recharge (if power is up). If you really need it working now, replace the powercell with a new one.

Blown up or destroyed

If someone blew up the apc or blasted it into another dimension follow the steps below.

1. First you'll want to whack off the cover; to do this just hit the APC with any sort of weapon, generally a boot knife is good for this.
2. Take out the powercell in the APC once the cover is off with an empty hand.
3. Use a screwdriver on the APC.
4. Use wirecutters on the APC.
5. Use a crowbar on the APC.
6. Build an APC frame from 2 metal sheets then click on the APC with the APC frame in hand.
7. Use cable coil on the APC.
8. Use a power control module on the APC.
9. Use a screwdriver on the APC.
10. Put a new powercell in the APC.
11. Use a screwdriver on the APC.
12. Open up the APC pop up window once you've completed all previous steps and turn on the breaker.

FOB Duty

---

As an Engineer on FOB duty, you'll be setting up the base that the marines will primarily use to organize, to heal up, to retreat to, and to make a final last stand at. To make a good FOB, you'll want to make strategic use of your landmines, the smartgun HMG or the sentry gun, and various defensive emplacements. A good FOB is the difference between losing the round and holding off long enough to make a push back and finally win the round since it provides a safe place for marines to rest, resupply and recover at.

Fortifications of the Trade

---

Image	Name	Material Needed	Function
	Wood Barricade	Wood	Used for a hasty defence against aliens. Mostly seen prespawned.
	Metal Barricade	Metal	Used for constructing auxiliary fortifications. Third most durable fortification. Can be repaired with a welder if not overtly damaged.
	Sandbags	Sandbags	Used for making directional defences, multiple can be applied to a tile. Needs to be filled up with empty sandbags and an entrenching tool. 25 in a filled stack. Second most durable fortification. Can't be repaired. Can be dismantled with an entrenching tool.
	Plasteel Barricade	Plasteel	Used to allow passage by closing it, and providing heavy protection. Can be repaired with the welder if not overtly damaged. Most durable fortification. Can be repaired with a welder if not overtly damaged.
	Barbed Wire	Metal	Used to make barricades and sandbags stronger, and making it so they can't be ran or climbed over. Also damages any thing that attacks it.
	Wall	Metal	Used to fully block off an area.

FOB Duty Cont.

---

Barricades will block projectiles from the direction it's facing, including boiler globs, which should be kept in mind while setting them up. Additonally, you'll want to keep a few key things in mind: Can marines easily move around the FOB, is it easily acessiable, and if needed, is it easy to retreat from and does it have multiple exits?

Another extremely important aspect of your FOB is looking out for flanks. The enemy can and will use these to their advantage, either to sneak in and harass wounded, or the burst in and slaughter the entire FOB. As well, you'll want to keep a look out for walls that have acid sprayed over them. This means in time another opening will present itself, and you'll want to throw up more barricades to compensate. Additionally, if you have barricades and metal to spare: THROW BARBED WIRE ON EVERYTHING as this'll increase strength, make it so runners can't run over it, and damage any attacking xenos. They only cost two metal, they're good.

Your Skillset

To find out about how the skill system works head over to the skills system page.

General Tips

• Examining an incomplete Sentry frame will list what it is and isn't missing. This can help if you stumble upon somebody's half-assed arts n' crafts project, or if you find yourself forgetting steps mid-construction.

• When constructing your defenses, keep in mind that some of your enemies can simply bypass them due to their speedy and slight nature, plan for this by ensuring some of the men guarding your defenses are geared, or at least prepared, for close quarters combat.

• All vendors contain a 'contraband' wire, pulsing this wire after beginning the hack with a screwdriver will cause a few new items to show up in the vendor, but as a general warning, it is against Marine Law to hack the vendors on the Almayer, so keep an eye out for MP's before you accidentally cause trouble.

• Plasteel and Metal are valuable resources sure, but just remember that you aren't the only person that needs them, don't hoard loads of building supplies otherwise you might find other players unable to perform their jobs.

• In a pinch, even the average door can make a solid defense, by welding a door shut it will no longer be able to be wrenched open, either by Xenomorphs or a man wielding a crowbar. Hacking the door and forcing its bolts down has this same effect, but welding is substantially quicker and a lot safer when you've got bad guys breathing down your neck.

• As an Engineer, it's in your job description to keep any defensive structures you or another engineer builds in tip-top shape, this may include having to repair metal barricades and the like in the midst of combat or replace melted structures with new ones, which is dangerous, but it's what you signed on for. This also goes for APC's and any broken lights you may see, you'll want to replace these post-haste so that marines may benefit from their existence.

• Just as a general reminder, if you intend to be hacking open doors or pulsing wires in vendors, you'll want to be wearing Insulated Gloves, Budget Insulated Gloves work too, but aren't as good. Failure to wear the correct PPE* for your work environment will result in a hearty shock if you touch the wrong wire. (*Personal Protection Equipment)

• You might've noticed that the welder is one of the two most important tools for an engineer to have, you may also have noticed it carries a measly 20u's of welding fuel before it needs to be refueled, or you could replace it with another welder that would eventually also need to be refueled. To do this, you'll need to find either a Welding Kit (It looks like two propane tanks were turned into a backpack, or some kind of futuristic jet pack) or a Fuel Tank (This one is a large gas canister that fills an entire tile, hard to miss it), the Welding Kit can be placed in the backpack slot for easy access, but carries less fuel than the Tank, the Tank carries a large amount of fuel, but can only be dragged around. After you've located your refueling utensil, have your welder in hand, make sure it is turned OFF (This part is key to success) and click on the Kit/Tank, you'll get a bit of flavor text saying 'the welder has been refueled' if you've done it correctly.